Skip to main content

Ooooof!

JRA. (AKA Just Riding Along). That was me last Thursday after leaving work. One minute I'm riding along on may way to complete an errand, and the next minute I'm finishing up a close inspection of the pavement on Stanford Ave., just east of Market. This change in status was unplanned, and a huge surprise to me. Right in the middle of this event I do recall thinking "I'm not going to like how this turns out". Sometimes I am just soooo right. I didn't like how it turned out at all.

I know full well that a 53 year old body really doesn't do well in these circumstances, and I did a 10 count before I got up, first making sure that there were no serious alarm bells going off. I was able to sit up, and very shakily stand up, but walking was not going right. One big problem was that there was something on the bottom of my shoe. Turns out that only 99% of my bike was a couple yards away. The other 1% in the form of a pedal and a 2 inch long segment of the right crank arm was still locked to my shoe. I went and sat on the wet curb in the light drizzle and tried to take stock. As soon as I sat down, a man with a very concerned expression came up and asked if I was ok. Best I could say was that I thought I was going to be, eventually.

So my circumstances were these: My crank arm had snapped off clean and I tumbled to my right, taking the bike with me. I think I landed first, flipping the bike over and then I rolled. I have bruises in odd places now, and those places were not the first ones to report in as damaged. As I answered the questions of the gentleman who stopped to help, another driver pulled up with his truck and immediately offered to take me where I needed to go as soon as I knew what that might be. Nothing was broken on my body, and I only had a small cut on my knee. The rest were minor abrasions and bruises, most of which I wouldn't know about until the next morning. I thanked both men for helping out, and then got a lift to the nearest BART station, called my wife to tell her I needed to be picked up, and in 30 minutes I was home.

Judging from the markings, it looks like that crack existed for quite some time. The light area is the portion of the crank that failed thursday, the dark section suggests to me a portion of the crank that was cracked or flawed in the casting from the start. The cranks were vintage Campy NR cranks, with gold anodizing. They had very few miles on them, in terms of a life span of a set of cranks. I estimate between 3,000 and 5,000 miles. There was no visible damage to the cranks so the crack was not begun by some other impact.

I did ride to work the next day, and the ride helped alleviate the soreness and stiffness I felt first thing in the morning. I was sure to ride slowly, turning small gears (on a different bike). Big cogs, and little rings all the way to and from work. I did not get on a bike all weekend, and there was a long time saturday when the rain took a break so I could have slipped a ride in. I've got more rides planned soon so I'll catch up on the mileage.

Comments

Unknown said…
Yikes! That's no good, sir!

Sorry to hear about that - I heard second-hand that you'd tumbled, but didn't get the whole story until I read this.

I've had a couple of broken cranks, one that put me down immediately, and the other that for some reason didn't. It's scary stuff.

I've nattered on about crank-thoughts here:
http://ramblings.cyclofiend.com/?p=399

Best wishes for a quick recovery!
- Jim
Joe said…
Wow Rob! Glad to hear you're okay! I know how bad unexpected tumbles to the pavement can be and in this case, you wouldn't have even seen that coming. I love the line about this not going to be good. For me, it was "this is going to hurt." Take care of yourself and please buy a reliable crank!

Joe
Robert said…
Ouch. Sorry to hear that. Glad your injuries aren't major. Extra-strength Tylenol helps.

You might be interested in browsing the Broken Bike Bits site:
http://www.pardo.net/bike/pic/fail-001/000.html
systemBuilder said…
If you look at the break, half of it is dirty, which means that the crank was half gone FOR A LONG TIME before it finally snapped, all at once, at the white boundary. INSPECT YOUR CRANKS for HAIRLINE CRACKS, CAMPY ONES ARE BRITTLE (7075, I think) !!
Eric Keller said…
classic fatigue crack. It initiated in the circular area of the dark region. The actual initiation site was quite small, probably a machining mark. It's possible you could find the actual site by eye. This took a very long time to propagate across the crank. The silver area is the part that broke all at once. You can see just before that there is a silvery line in the dark region. I'm guessing that is wear from many pedal strokes. So the crank was bending a little and wearing down the fracture surface.
Eric Keller said…
and I forgot to add, glad to hear you are ok. I'm riding some vintage Campagnolo cranks and I need to look at them again.
rob hawks said…
Thanks everyone for your well wishes. Recover proceeds, though I've discovered new bruises I didn't see for days! I've commuted by bike every day, but skipped any riding on the weekend (though the spirit was willing). The biggest problem is my right knee, which aches when I sit at my desk, but seems fine when I ride. Guess I better get around to riding then.
Dr Codfish said…
Thanks for giving up your boby to demonstrate a point I made in an article I recently wrote (you will see it soon). Someone had to do it and I appreciate you 'taking the fall' for the rest of us.

Unexpected stuff happens and because it is unexpected we don't generally do the close up inspections necessary to detect/prevent it. In this, the pre-PBP year I prescribe a meticulous wash down of the velo, followed up with a very close up (Crackerjack magnifing glass?) inspection to suss out the tell tale signs of 'unexpected' problems.

So happy you came through in relatively good shape!

Yr Pal Dr C
Peter McKay said…
Hey Rob, Glad that you will be okay! Defective crank arm? Freak accident.
Old5Ten said…
hmmmmm.... metal....

Popular posts from this blog

2007 PBP, Part 1: Arrival and departure

On the Sunday before the start of the 2007 Paris-Brest-Paris (PBP) Randonnee, a large number of Northern California riders gathered after the mandatory, but this year much abbreviated, bike inspection. We sat at a cafe, indoors alas, and tried to ignore the falling rain outside. My friend Reid made a waggish remark about the experience we were about to have. He said that doing Paris-Brest-Paris in the rain could be quite easily simulated at home by standing in a cold shower in bicycling clothing while ripping up $100 bills. I thought about this remark and in the the long, dark hours of the first night's ride through the French countryside, and with the rain beginning to pelt us once more, I came to the conclusion that the analogy was inadequate. What was missing in the comment was that it failed to include any mention of first having to stand in line to get into the cold shower. Having now commented on the inadequacies of the analogy (and pausing briefly to state that I completed

Where is Rob?

 Every four years, the Audax Club Parisien (ACP) will hold their Paris-Brest-Paris (or PBP) Randonneur event. There has been an amateur version of PBP since 1931. However, PBP has existed in some form since 1891, though back then it was a race, held about every 10 years until 1931 with a gap for the war, and then for the last time as a race in 1951. The take-away though is that PBP is no longer a race, there is no first and last place and the only metric to assess riders really is one of pass/fail. You either finish in the time limit, or you don't. Currently, PBP offers three start groups: 80 hours, 90 hours and 84 hours, in order of start. Each group will broken up into start waves with somewhere north of 200 (250?) riders in each wave. Under the direction of the ACP, Randonneurs USA (RUSA) sanctions qualifying events for PBP of 200, 300, 400 and 600km, each with a time limit. RUSA administers regions through out the US and there are five of those in Northern California, one in C

Cycling mileage spreadsheet (using google docs)

Several years back I was looking for a good way to keep track of my annual cycling mileage and a little Googling resulted in finding this website and it's link to a downloadabe Excel spreadsheet for keeping track of cycling mileage. Mark Pankin, who created that Excel doc annually updates the document and makes it available to the public. I think the document is great and I've used it for several years. One issue I did have with it though was gaining access to the document remotely. I kept it on my computer at home but sometimes I wanted to update it when I was not at home or just pull data from it, again when I wasn't at home. I had had some email exchanges with Mark to ask about certain features of his document and this led to a discussion about porting the document over to Google Docs. Mark was not a Google Docs user but he didn't mind at all if I created a document using his Excel spreadsheet as a model. While there is some ability to import and export Excel format